Wireless Wide Angle Video Camera for Inside or Outside

The wireless security camera will transmit COLOR video images to your television set, or VCR up to 100 feet away. The Wide Angle lenses gives you a full 120º viewing angle. Use it indoors to monitor a nursery, a sales floor, an entrance, or mount it outside to monitor your property. Hook it up to your VCR to tell you who was at your door while you were gone or use it as a security camera to keep a record of everyone who enters your business. It plugs into a standard 110 VAC outlet and includes a wireless receiver pictured below.

Wireless Receiver Included with every camera purchased.

Optional Tripod

The Security Flood Light will connect to your house or building standard 110 AC wiring and handle up to two 150 watt flood lights, not included.

Security Flood Light with Video Camera & Motion Detector

Mount the Security Flood Light to the outside of your house or business to illuminate your front yard, back yard, driveway, parking lot, or entrance. The light will automatically turn on whenever motion is detected in it's range. It also has a color video camera with a wireless transmitter to show you exactly what has tripped the motion sensor.

Wireless Receiver Included

When the Security Flood Light detects motion, the wireless camera is turned on and if it's dark, the Flood Lights are turned on. The motion detector has a range of 20 feet with a 60º field of view. The Security Flood Light Kit is shown above with it's control panel cover open. The controls allow you to set the camera to come on whenever motion is detected, or only when motion is detected after dark. You can also set the time the camera and lights will remain on after motion is detected. The camera will transmit up to 100 feet, depending on obstructions or near by metal objects. The receiver, included, is connected to a TV or VCR by a single RCA jack cable which is included. The receiver also comes with a AC Adapter that plugs into a standard 110 VAC outlet. Important, you need to be sure your television or VCR has a RCA socket for video input, most do, and is not being used by other equipment such as DVD, cable, or satellite receiver.

Wireless Remote Control

No more fumbling in the dark looking for the light switch. Use these pocket sized remote controls to turn on and off lights and appliances in your home or business. Turn on a light in your house from outside when you come home, and turn it off when you leave. Turn on the coffee maker from your bedroom. Turn on or off a light in the basement from the top of the stairs. Dim any lights plugged into a lamp module or wired to a switch module. Arm and disarm alarms, such as the Rex Barking Dog Alarm (AL18).
Requires CR2016 batteries, included.

The wireless remote control transmits a signal to the transceiver module, up to 100 feet away, which relays the signal through the building wiring system to any module. A dial on the module sets the module to respond to button 1,2,3 or 4 on the remote control unit. When a button on the remote control unit is pressed, any module set to the corresponding button number is activated. Any lights plugged a lamp module or wired to a switch module can be dimmed or brightened with the blue buttons on the remote control units.

A Transceiver Module is included with the purchase of either the 2 Button Remote or 4 Button Remote. The Transceiver Modules also has one outlet that is controlled by the remote control unit.

Wireless Motion Detector

Only 2" by 2", but powerful enough to sense motion up to 20 feet and transmit to a transceiver up to 100 feet away. The Wireless Motion Detector is completely portable and works on 2 AAA batteries, not included. It can be used indoors and it is completely weather proof for use outdoors.

A Wireless Motion Detector is used with the Transceiver Module, included with every Motion Detector. When motion is detected, the Wireless Motion Detector sends a signal to the Transceiver Module. The Transceiver then sends the signal through the building AC wiring to any modules that is plugged in.

Any module, such as the WS68 Lamp module, WS75 Appliance Module, WS76 Wall Socket Module, WS78 Switch Module, or WS77 Chime Module, set to the same code as the motion detector, will be activated or deactivated. The Wireless Motion Detector has an adjustable time delay from 1 minute to 256 minutes to control how long lights remain on after motion is no longer detected. It also can be used to turn on selected lights at dusk and turn them off at dawn. Stop wasting electricity, use it to automatically turn on lights when you enter a room and turn them off after you leave. Mount it near a door to activate a chime in another room when a guest arrives. Use multiple Motion Detectors with a single Transceiver. Each Motion Detector can be set to one of eight codes to activate modules that have been set to the same code.

Wireless Modules

Any of these modules can be activated by the Wireless Remote Control units, or the Wireless Motion Detector.
  To use these modules requires a WS62, WS64, or WS21

The Appliance Module can be used to control up to 15 amp heaters, 1/3 hp motors, televisions, stereos, toasters, coffee makers, and up to 500 watt lamps.

Lamp Module is used to control low power lights up to 300 watts. When used with the Remote Control Units, this module can be used as a dimmer for any lights plugged into it.

Install the Wall Socket Module as you would a normal electrical outlet. The bottom socket is always active and the top socket is controlled by the remote control unit or wireless motion detector. This module will handle up to 15 amps. When this socket is used to control incandescent lights, it can be used as dimmer when controlled by the remote control unit.

Replace any standard light switch with the Wall Switch Module to control lights with either the remote control unit or the wireless motion detector. The lights can also be turned on and off with the switch. When used with the remote control unit, this module will also act as a light dimmer. Works with any incandescent lights up to 300 watts.

The Chime Module can be activated by the wireless remote control units or the wireless motion detector. When used with the wireless motion detector, it acts like a door bell that can be placed anywhere in your home or office and will chime when a visitor approaches your door.